Loading ...
Loading ...
Loading ...
42
4-3 Setting the Auto Surround Mode
The surround mode used at last for the three types of input signals shown below is stored in the memory, and the signal is automatically played
with that surround mode the next time it is input.
Note that the surround mode setting is also stored separately for the different input sources.
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY PLIIx cinema)
e Multi-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY/DTS SURROUND)
Default settings are indicated in ( ).
During playback in the PURE DIRECT mode, the surround mode does not change even if the input signal is changed.
1
Select “Auto Surround Mode” at the Advanced
Playback Menu.
(Remote control unit)
Auto Surround
*Advanced Play
(Remote control unit)
2
Press the ENTER button.
Display the Auto Surround Mode screen.
3
Select “ON” if you want to use the auto surround
mode, “OFF” if you do not want to use it.
4
Enter the setting.
The Advanced Playback Menu reappears.
(Remote control unit)
ON/OFF: ON
*Auto Surround
(Remote control unit)
Setting the Option Setup
1
Select “Option Setup” at the System Setup Menu.
2
Display the Option Setup Menu Screen.
(Remote control unit)
Option Setup
*System Setup
(Remote control unit)
5
Contents stored in the auto surround mode can be
checked with the on-screen display.
(Remote control unit)
Loading ...
Loading ...
Loading ...