Loading ...
Loading ...
Loading ...
9
Tighten by hand only.
Remove the electronic ignition cap by unscrewing and slide the battery into the battery slot. Make sure that the
positive side of the battery faces towards the outside. Screw the electronic ignition cap over the battery, tightly, but
by hand only.
5. At this time if you wish to place the lava rocks over the burner
ring (optional). The guard must not be blocked!
• DO NOT place more than ¼ inch depth of lava rocks
above the burner holes. Doing so will suffocate the
flame.
• DO NOT place more than 13.2lb of lava rocks about the
burner holes. Doing so will suffocate the flame.
WARNING: Fire table and LP cylinder must be at a
minimum of 60” inches apart.
KEEP GUARD CLEAR! DO NOT BLOCK FLAME!
Loading ...
Loading ...