Loading ...
Loading ...
Loading ...
Toreducetheriskoffire,electricshock,orinjuryto persons,read
w_i,_,_,n_Air Conditioner the IMPORTANT SAFETYINSTRUCTIONSbefore operating this appliance.
NOTE: If the air conditioner isturned off,
wait 3 minutes before restarting. This
allows pressure inside the compressor to
equalize. Failure to follow these
instructions may cause inefficient
operation.
To begin operating the air conditioner, follow these steps:
1. Plug in the air (onditioner. (Toprevent electrical hazards, do not usean extension
cord or an adapter plug.)
2. Set the thermostat to the highest number (coldest or cooler setting).
3. Set the selector (ontrol to the highest COOL setting (see below).
4. Adjust the louvers for (omfortable air flow (seeAir Dire(tional Louvers).
5. Once the room has cooled, adjust the thermostat to the setting you find most
comfortable.
Review the "Air Conditioner Features" section for other settings.
Air Conditioner Features
The contro/s featured in this manual are representational of the many models
avai/ab/e. Your model may offer slight!y different features.
COOL Mode
When in one of the COOL settings, the air conditioner runs all the time, circulating
the air. Cooling starts only if the room temperature rises above the coolness level
selected on the TEMP Control, and stops once the set coolness level isreached. This
setting gives the most even room temperatures.
FAN Mode
When in the FANsetting, the fan Funs continuously to circulate air in the room
without cooling.
Automatic Thermostat
When a COOL setting isselected, the thermostat controls the amount of cooling by
automatically turning the cooling compressor on and off in response to the room
ternperatu re.
Set the thermostat at the highest number for the coldest setting for cooling. Once
the room has reached the desired temperature, adjust the thermostat to a number
providing the most comfortable amount of cooling. Higher numbers provide lower
room temperatures. Lower numbers provide warmer room temperatures.
Night Time Cooling
When outside temperatures drop below 70% (21°C) and the unit is cooling, frost
may form on the coils and block airflow into the room. If this occurs, operate the
air conditioner on the FAN setting (or CONSTANT FAN/HIGH on Energy Saver
models) to defrost the coil.
If cooling while the outside temperature is low, set the thermostat to the middle
position. Make sure the louvers are open. This will help prevent frost build-up.
Loading ...
Loading ...
Loading ...