Loading ...
Loading ...
Loading ...
Installation Operation and Maintenance Instructions
Door Adjust
HINGE COVER
Hinge cover included with the literature bag is optional.
To install hinge cover:
1. Press hinge cover squarely over hinge.
DOOR ALIGNMENT AND ADJUSTMENT
Align and adjust the door if it is not level or is not sealing
properly. If the door is not sealed, the unit may not cool properly,
or excessive frost may form in the interior.
NOTICE
Properly aligned, the door’s gasket should be firmly in
contact with the cabinet all the way around the door (no
gaps). Carefully examine the door’s gasket to ensure that it
is firmly in contact with the cabinet. Also make sure the
door gasket is not pinched on the hinge side of the door.
To align and adjust the door:
1. Gently pry off hinge cover from top of unit.
2. Loosen (do not remove) top and bottom hinge screws using
a Torx T-25 screwdriver on the top and a 1/4" socket on the
bottom.
3. Align door squarely with cabinet.
4. Make sure gasket is firmly in contact with cabinet all the way
around the door (no gaps).
5. Tighten bottom hinge screws.
6. Tighten top hinge screws and replace hinge cover.
Location of the unit may make it desirable to mount the door
on the opposite side of the cabinet.
The hinge hardware will be removed and reinstalled on the
opposite side of the cabinet.
TO REVERSE THE DOOR (Black and Stainless Models)
Hinge Cover
Top Hinge
Right Side
Top Hinge
Left Side
Pivot
Screw
Remove top hinge and door:
1. Remove hinge cover from top of unit.
2.
Hold door to keep it from falling.
3.
Remove top hinge from cabinet using a Torx T-25
screwdriver to remove three screws.
4.
Remove pivot screw from hinge, flip hinge over, and
install the pivot screw in the same hole from the
opposite surface.
15
Loading ...
Loading ...
Loading ...