Loading ...
Loading ...
Loading ...
51
OPERATION / USER
At rst control turning on, the display shows the ashing clock that increases by one
unit every minute. The oven cannot operate and the possible operations to release it
are: “Setting the clock” procedure through the [+] and [-] buttons or alternatively directly
turning on the oven which involves the acceptance of the current clock value whatever
it is. Detailed clock setting, timer, duration and end of cooking operations are indicated
in the respective para-graphs below. Through the various setting buttons ( , , )
you enter the display and changing mode (indicated by a ashing display), in which [+]
and [-] buttons are enabled to adjust the value shown on the display. This value is still
accepted after 4 seconds from the last press of a button (the display remains lit). All
settings are can be cancelled by pressing keys and .
Simultaneously press buttons and for 5’’ (the display ashes) and alter the time
using the keys [+] and [-]. The clock can only be set with the oven on stand-by.
The time display mode can be altered: during time setting by pressing the button for
4 seconds; with the [+] button you can choose the 24 hours or 12 hours AM/PM option.
Turn selector [S]. The display shows “On”. The light inside the oven comes on after two
seconds and the display shows the default temperature expected from the selected
cooking mode and the corresponding resistive loads are activated: in the case of
gas functions the burner’s ame turns on automatically thanks to a particular electric
component which controls the ame. If, after 3 attempts (each attempt has a duration
of 10’’ with a pause of 5’’ in between), the ame does not remain inserted, the system is
blocked, and the orange LED of the thermostat starts ashing. To reset the system just
turn off the oven turning the selector [S] back the selector to [0] (the display shows
“OFF”), and repeat the procedure.
The function does not interact with the loads, and is available regardless of the oven’s
status. Press the button : the bell symbol lights up and the display shows “0’ 00”. Set
the time with [+] and [-], up to a maximum of 180 minutes, after 4 seconds without any
increase or decrease the information is accepted, the bell remains on. By pressing the
button after changing the timer value it reverts to clock mode, having accepted the
just altered value. Upon expiry of the set time a buzzer sounds together with the symbol
ashing. To stop the buzzer and the ashing, simply press any button.
Turn the oven on. Select a cooking function from those available. With knob [T] select
the desired temperature. After 4 seconds after the last setting the oven operates for an
indenite time and the selected temperature remains on the display.
Turn the oven on. Press button , the display shows “End”. Set the end of cooking time
with [+] and [-] buttons (the maximum cooking time is 10 hours). By pressing the button
after changing the duration value it reverts to clock mode, having accepted the just
altered value. After 4 seconds from the last setting the oven is on for the set time. Having
reached the programmed time you enter cooking nished mode.
Turn the oven on. Press button and select the cooking start time with [+] and [-]
buttons. Press button , the display shows “End”. Set the end of cooking time with [+]
and [-] buttons. If no cooking time is selected, the oven remains in manual cooking mode
indenitely. After 4 seconds from the last setting the oven is on up to the specied time.
You can always select a cooking function from those available and the temperature can
be changed. Having reached the programmed time you enter cooking nished mode.
Appliance operation
Setting the clock
Turning the oven on and
off
Timer
Indenite manual
operation
Semi-automatic end of
cooking operation
Automatic operation
INSTRUCTIONS FOR USE
– 5-button electronic programmer H3 (HYBRID OVEN)
Loading ...
Loading ...
Loading ...