Loading ...
Loading ...
Loading ...
6
http://www.NewAir.com
• To prevent a possible fire, do not block air intakes or exhaust in any manner.
Do not use on soft surfaces, like a bed, where openings may become
blocked.
• Use this heater only as describe in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock or injury
to persons.
• This heater draws 23.4 Amps during operation. Be sure to use a dedicated
250VAC, 30A circuit for the heater.
• Caution: it is normal for the plug and cord to feel warm to the touch. A plug
or cord which becomes hot to the touch or becomes distorted in shape may
be a result of a worn electrical outlet. Worn outlets or receptacles should be
replaced prior to further use of the heater. Plugging the heater into a warm
outlet/receptacle may result in overheating of the power cord or fire.
• Ensure the heater is on a stable, secure floor surface to eliminate the
potential of tipping it over.
• Be sure that the plug is fully inserted into the appropriate receptacle. Please
remember that receptacles also deteriorate due to aging and continuous
use: check periodically for signs of overheating or deformations evidenced
by the plug. Should this occur, do not use the receptacle. Call your
electrician.
• Check that neither the appliance nor the power cable has been damaged in
any way during transportation.
• Make sure that no pieces of polystyrene or other packaging material have
been left between one element of the appliance and another. It may be
necessary to clean the appliance with a vacuum cleaner.
• When switching on the appliance for the first time, you may notice a slight
odor which is normal with new electrical appliances. Allow odor to dissipate
by running appliance at full power for about ten minutes. Make sure that the
room in which the appliance is located is well ventilated during this
operation.
• This heater draws 23.4 Amps during operation. To prevent overloading a
circuit, do not plug the heater into a circuit that already has other appliances
working.
• Do not run in locations when the heater will be left unattended for long
periods of time.
• Do not use attachments or filters. They are not recommended.
• Always plug the heater directly into a wall outlet/receptacle. Never use with
an extension cord or portable power tap (outlet/power strip).
• A heater has hot, arcing and sparking parts inside. Do not use it in areas
where gasoline, paint or flammable liquids are used or stored.
Loading ...
Loading ...
Loading ...