Loading ...
Loading ...
Loading ...
Problem Solution
Oven smokes excessively during broiling. - Incorrect setting. Follow broil instructions in Setting Oven Controls.
Broiler drawer is open. Be sure broiler drawer is closed,
Meat too close to broil burner, Reposition the broiler drawer rack to provide
proper clearance between the meat & the burner.
- Meat not properly prepared. Remove excess fat from meat. Cut remaining
fatty edges to prevent curling, but do not cut into lean.
Broiler pan and insert wrong side up and grease not draining. Always place
insert on the broiler pan with ribs up & slots down to allow grease to drip
into pan.
- Grease built up on drawer surfaces. Regular cleaning is necessary when
broiling frequently. Old grease or food spatters cause excessive smoking.
Flames inside oven or smoking from - Excessive spillovers in oven. For example this will happen for pie
oven vent. spillovers or large amounts of grease left on the oven bottom. Wipe up
excessive spillovers before starting oven. If flames or excessive smoke
are present see "Setting broil" in the Setting Oven Controls.
ovencontioipanelbeeps ispiays ; ovencontroihasaetecte afauito er orconaition:P essclearoffto.....
F code error, clear the display & stop beeping. Try the bake or broil feature again. If the
F code error repeats, remove power from appliance, wait 5 minutes and
then repower appliance and set clock for the time of day. Try the bake or
broil feature again. If the fault recurs, record fault and call for service.
Oven light does not work. ,, Besure the light is secure in the socket, Also see"Replacing oven light" in the
Care &Cleaning section,
Appliance is not level. - Be sure floor is level, strong & stable enough to adequately support range.
If floor is sagging or sloping, contact a carpenter to correct the situation.
Poor installation. Place oven rack in center of oven. Place a level on the
oven rack. Adjust leveling legs at base of appliance until the rack is level.
Kitchen cabinet alignment may make range appear not level. Be sure
cabinets are square & have sufficient room for appliance clearance.
Cannot move appliance easily. Appliance - Cabinets not square or are built in too tightly. Contact builder or installer to
must be accessible for service, make appliance accessible.
Carpet interferes with appliance. Provide sufficient space so appliance can be
lifted over carpet.
Loading ...
Loading ...