Loading ...
Loading ...
Loading ...
Page 5
remove the battery and make certain all
moving parts have stopped.
• Never spray water directly into the motor
compartment of the machine.
• Use only identical replacement parts when
servicing the machine. Use of unauthorized
parts may create a risk of serious injury to
the user, or damage to the product.
• Use only Masterforce Batteries: BAB726
and other BAB series
.
• Use only Masterforce Charger: CAB809
and other CAB series.
SPECIFIC SAFETY RULES
• Cleaning, user-maintenance (such
as lubrication adjustment, and the
like), operations recommended by the
manufacturer, and a warning to the user that
any other servicing should be performed by
an authorized service representative.
• Do not use near underground electric cables,
telephone, lines, pipes, or hoses. If in doubt,
contact your utility or telephone company to
locate underground services.
• If the machine strikes a foreign object,
stop the motor, remove the battery pack,
thoroughly inspect the machine for any
damage, and repair the damage before
restarting and operating the machine.
• Maintain Appliance With Care – Keep cutting
edge sharp and clean for best performance
and to reduce the risk of injury.
• Do not overload the machine capacity by
cultivating too deep in a single pass or at too
fast a rate.
• Stay alert. Watch what you are doing. Use
common sense. Do not operate the machine
when you are tired, ill, or upset.
• Don’t use in rain.
• Be aware that the equipment may
unexpectedly bounce upward or jump forward
if the tines should strike buried obstacles such
as large stones, roots, or stumps.
• Wear hearing protection.
• Ensure that people and pets are at least 50’ (15
m) away from the machine while in use.
• Ensure that work area is free of slippery spots
or excessive quantities of stone.
• Start the machine carefully according to
instructions from a normal operating position
and with feet well away from the tines. It will
SAFETY INSTRUCTIONS
do the job better and with less likelihood of
a risk of injury at the rate for which it was
designed.
• Keep hands away from blades.
• Remove the battery pack from the machine
before unclogging the tines and when making
any repairs, adjustments, or inspections.
• Never operate the equipment on a slope.
• Use extreme caution when pulling the
machine towards you.
• When not in use, the machine should be
stored indoors in dry, and high or locked-up
place – out of reach of children.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from
one terminal to another. Shorting the battery
terminal stogether may cause burns or a re.
• Keep Children Away — All visitors and
bystanders should be kept at a distance of at
least 50 feet from work area.
• Do not use a battery pack or appliance that is
damaged or modied. Damaged or modied
batteries may exhibit unpredictable behavior
resulting in re, explosion or risk of injury.
• Don’t grasp the exposed cutting blades or
cutting edges when picking up or holding the
machine.
• Do not expose a battery pack or appliance
to re or excessive temperature. Exposure to
fire or temperature above 130°C may cause
explosion. The temperature of 130°C can be
replaced by the temperature of 265°F.
• Follow all charging instructions and do
not charge the battery pack or appliance
outside of the temperature range specified
in the instructions. Charging improperly or at
temperatures outside of the specified range
may damage the battery and increase the risk
of re.
• Have servicing performed by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the product
is maintained.
• Do not modify or attempt to repair the
appliance or the battery pack (as applicable)
except as indicated in the instructions for use
and care.
• Check damaged parts. Before further use
of this cultivator, a guard or other part that
is damaged should be carefully checked to
determine that it will operate properly and
perform its intended function. Check for
alignment of moving parts, binding of moving
Loading ...
Loading ...
Loading ...