Loading ...
Loading ...
Loading ...
18
EN
• In order to avoid overheating, do not cover or obstruct the heater in any way.
• Overheating will result if it is accidentally covered.
• Never immerse the product in water or any other liquids.
• Do not use this heater in the immediate surroundings of a bath, a shower or a
swimming pool.
• Do not use the appliance outdoors.
• Do not use if you have wet hands.
• Never use the appliance on or near hot surfaces.
• Before cleaning the appliance, ensure it is unplugged from the power and that it is
completely cooled.
• Do not clean the appliance with abrasive chemicals.
• Never use accessories that are not recommended or supplied by the manufacturer.
It could cause danger to the user or damage to the appliance.
• Do not lift the appliance by the front panel.
• In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this
appliance must not be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on and off by the utility.
Note: This heater is not equipped with a device to control the room temperature. Do
not use this heater in small rooms when they are occupied by persons not capable of
leaving the room on their own, unless constant supervision is provided.
INSTALLATION
Unpack the heater carefully and retain the packaging for possible future use.The heater
are normally positioned against a wall.
A choice of 1kW or 2kW heat output is provided by the heater, which is located at the
bottom of the heater.
Before connecting the heater check that the supply voltage is the same as that stated on
the heater.
Note: Used in an environment where background noise is very low, it may be
possible to hear a sound which is related to the operation of the ame effect. This is
normal and should not be a cause for concern.
Loading ...
Loading ...
Loading ...