Loading ...
Loading ...
Loading ...
SPECIFICATIONS
• Power output: 30W
• USB cable: 19.7 in. (0.5 m)
TROUBLESHOOTING
LEGAL NOTICES
Warning: Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
Industry Canada Compliance
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
1-877-467-4289 (U.S. and Canada)
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
USING YOUR BLUETOOTH SPEAKER
1 Press the POWER button to turn on the speaker. When
the speaker is on, the blue LED lights on the left of the
power button.
2 Press the VOL-/VOL+ button to adjust the volume. The
blue LED ashes once with each press. Press and hold
the VOL-/VOL+ button. The blue LED ashes rapidly.
3 Press the PLAY button to play or pause the speaker in
Bluetooth mode.
Note: In battery power mode, press the CHARGE ON/OFF
button to enable USB charging.
Bluetooth mode
1 Turn on the speaker. Bluetooth pairing is automatically
turned on and the blue LED ashes.
2 On your Bluetooth device, click “NS-CSPBTWP1” to pair
with the speaker.
3 After pairing successfully, the LED stays lit.
4 If there is an incoming call, the LED ashes quickly.
Note: After switching to Bluetooth mode, the speaker
automatically searches for a Bluetooth device and reconnects
if the devices have paired before. If it doesn’t nd any paired
device, it will enter pairing mode to search for new devices.
AUX mode
• The speaker automatically switches to AUX mode when
you plug in an AUX cable. Bluetooth mode is disabled.
Note: Press the PLAY button to mute the speaker when
playing music. Press again to unmute.
PROBLEM
No power
No sound or low
volume
Cannot establish
Bluetooth
connection
My Bluetooth
device keeps
unpairing
“NS-CSPBTWP1”
does not appear
on my Bluetooth
device
SOLUTION
• Make sure that your speaker is plugged in
and turned on.
• Make sure that your Bluetooth device is
turned on, Bluetooth is turned on, and
NS-CSPBTWP1 is selected.
• Turn up the volume on your speaker.
• Turn up the volume on your Bluetooth
device.
• Make sure that your Bluetooth device is
not muted.
• Make sure that your speaker is not paired
to another Bluetooth device.
• Make sure that your Bluetooth device is
not paired to another Bluetooth device.
• Shorten the distance between your
speaker and your Bluetooth device.
• Turn your devices o, then on. Re-pair
your speaker and your Bluetooth device.
• Make sure that your speaker is not paired
to another Bluetooth device.
• Make sure that your speaker and
Bluetooth device are both in pairing
mode.
• Make sure that your Bluetooth device
supports Bluetooth v4.0 and below.
• Make sure that your Bluetooth device is
not connected to any other device.
• Make sure that you have selected
NS-CSPBTWP1 on your Bluetooth device.
• Shorten the distance between your
speaker and your Bluetooth device.
• If the battery on your Bluetooth device is
low, recharge the battery.
• Shorten the distance between your
speaker and your Bluetooth device.
• Put your speaker into pairing mode, then
refresh your list of Bluetooth devices. For
more information, see the documentation
that came with your Bluetooth device.
STATE
BT disconnected
BT connected
Bass Boost ON
Bass Boost OFF
AUX PLAY
AUX MUTE
Charging
Full charge
Low battery
LED
Blue LED slow ash
Blue LED on
Blue LED ash once
Blue LED ash twice
Blue LED fade in/out
Blue LED ash twice
Red LED on
Red LED o
Red LED fast ash
V2 ENGLISH 17-0393
Loading ...