Loading ...
Loading ...
Loading ...
Connecting the Adapter is a relatively simple process. First, connect one
Adapter to the broadband modem or router and the coaxial network to
establish the Internet signal. Then, additional Adapters can be installed
throughout the home or office at any location Ethernet Internet access is
needed, and an available coaxial port is available.
Connecting the First Adapter
The first Adapter must be connected to the broadband modem or router
and the coaxial network. This Adapter takes the Internet signal from the
modem/router and delivers it to the coaxial network.
To connect the first Adapter:
1. Connect a coaxial cable to a nearby coaxial outlet.
2. Connect the other end of the coaxial cable to the Coax In coaxial port
on the side of the Adapter.
3. Connect one end of an Ethernet cable to the Ethernet port of the
modem/router.
4. Connect the other end of the Ethernet cable to the Ethernet port
on the side of the Adapter.
5. Plug the provided power adapter into the Power port on the side
of the Adapter.
6. Plug the other end of the power adapter (external, 5V DC, 2A,
made by APD, model #WB-10E05FU) into an electrical outlet.
4User Guide | Bonded MoCA Network Adapter | Model # ECB7250
Connecting the Adapters
Loading ...
Loading ...
Loading ...