Loading ...
Loading ...
Loading ...
EN
W415-2036 / D / 08.05.21
17
Dynamic Heat Control™
Ceiling
(LV [without DHC] illustrated)
Safety Barrier
No screws
in this area.
Stud
!
WARNING
• Your appliance, gas/electrical connections, venting and various key components are hidden behind the wall. It
is critical that no screws penetrate the areas illustrated below. Failure to follow instructions may cause improper
operation, damage, personal injury or fire. Always use a stud finder and only screw into studs.
5.0 clearances around fireplace
The temperatures above
the fireplace for LV models
WITHOUT DHC™ will be
hot, making it unsuitable
for mounting a TV or other
objects sensitive to heat
above the fireplace without
risk of damage.
Installing a mantel
between this appliance and
electronics or other materials
that may be sensitive to
heat will reduce the effect of
direct heat on them.
The size and material of
the mantel will affect the
allowable clearance above
your fireplace and incorrect
placement could become
a fire hazard. Consult your
installation manual and/or
authorized dealer for more
information.
Your fireplace, gas/electrical
connections and vent are
hidden directly behind the
finished wall. Great care
should be taken to avoid
screwing or nailing into these
components. Always use a
stud finder to determine stud
location and only screw into
studs.
Do not screw into the area
around the fireplace opening.
If in doubt, refer to your installation manual and/or contact your authorized dealer.
important:
(Screw restriction applies
to ALL models.)
Loading ...
Loading ...
Loading ...