Loading ...
Loading ...
2. CONTENTS
- 3 -
- 10 -
Depending on manufacture and model, some engine components do change. Please check with
Autodata or the manufacturer’s data before use.
1. TITLE PAGE
1.1 INTRODUCTION.......................................................................................................... 2
1.2 REVISION HISTORY .................................................................................................. 2
1.3 UNDERSTANDING THIS GUIDE................................................................................. 2
1.4 COPYRIGHT NOTICE .................................................................................................2
2. CONTENTS
2.1 CONTENTS ....................................................................................................................3
3. GUARANTEE
3.1 GUARANTEE ............................................................................................................... 4
4. GENERAL PRODUCT INFORMATION
4.1 GENERAL PRODUCT INFORMATION ....................................................................... 5
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS FOR USE
Personal safety........................................................................................................... 6
6. CONTENTS
6.1 PARTS DRAWING AND LISTING ............................................................................... 7
7. APPLICATION
7.1 PRODUCT APPLICATION AND COMPATIBILITY LISTING ...................................... 8
8. PREPARATION
8.1 ADVISORIES BEFORE USE ...................................................................................... 9
9. PROCEDURE AND APPLICATION GUIDE
9.1 APPLICATION GUIDANCE................................................................................... 10-11
10. EXPLANATION OF SYMBOLS
10.1 EXPLANATION OF SYMBOLS .................................................................................. 11
9. PROCEDURE AND APPLICATION GUIDE
The following instructions are for guidance only. Please refer to OEM derived data such as
the vehicles manufactures own data or Autodata.
The use of these engine timing tools is purely down to the user’s discretion and Draper
cannot be held responsible for any damage caused what so ever.
Component Descriptions:
Components 1 = CAMSHAFT ALIGNMENT PINS X 2
Components 1 are used to lock the camshafts in their timed position as shown.
Component 2= FLYWHEEL HOLDING TOOL
Component 2 is used to lock and hold the flywheel while loosening or tightening the front
pulley fixing bolt.
Components 3, 4 & 6 = CRANKSHAFT TIMING TOOL
Use components 3, 4 and 6 to hold the crankshaft in its timed
position.
Loading ...
Loading ...
Loading ...