Loading ...
Loading ...
Loading ...
21
EN
A distance of 600 mm from bottom of heater to oor is recommended for optimum
viewing of fuel bed. See Fig.1 for recommend xing dimensions. For optimum viewing,
mark the top ve screws xing positions on wall in accordance with the recommend
xing dimensions (see Fig.2). Drill holes with a No. six drill bit.
Fix the wall bracket using that the plug and screws provided. Attach the lower xing
bracket the base of the re using the two small black screws supplied; ensure the bracket
is tted so that it is level with the back. Carefully lift the heater up ensuring that the top
rear ledge of heater engages with the wall bracket (see Fig.2 in circle) and is sitting
centrally. This process should be carried out by two people to avoid injury or damage.
Mark the lower xing bracket two xing hole positions on the wall-see Fig.3, remove the
heater. Drill the wall and insert the wall plugs. Ret the heater to the wall and fasten the
bottom xing bracket to the wall using the screws provided to permanently x the heater
in place. Unpack the pebbles from the bag and place them along the light unit in the
desired position.
Loading ...
Loading ...
Loading ...