Loading ...
Loading ...
Loading ...
5
Before Using Your Kettle
If you are using the kettle for the rst time, it is recommended that you clean your kettle before use by
boiling a full kettle of water twice and then discarding the water.
NOTE: The max capacity of kettle is about 7.2 cups.
Using Your Kettle
1. To ll the kettle, remove it from the power base and open the lid by pressing the button on the
handle. Fill with the desired amount of water. Alternatively, the kettle may be lled through the
spout. The water level should not exceed max marks or sit below MIN-MAX. Too little water will
result in the kettle switching off before the water has boiled.
NOTE: Do not ll the water over the maximum level, as water may spill out of the spout when
boiling. Ensure that the lid is rmly in place before plugging into the power outlet.
2. Position the kettle on the power base.
3. Connect the plug into a power outlet. Press the switch down, the indicator light will turn on. Then the
kettle will start to boil the water. The kettle will switch off automatically once the water has boiled.
NOTE: Ensure that the switch is free of obstructions and that the lid is rmly closed.
The kettle will not turn off if the switch is constrained or if the lid is opened.
4. Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from your kettle as boiling water will scald.
5. The kettle will not re-boil until the switch is pressed again. The kettle may be stored on the power
base when not in use.
Boil-Dry Protection
Should you accidentally let the kettle operate without water, the boil-dry protection will automatically
switch off the power. If this occurs, allow the kettle to cool before lling with cold water and re-boiling.
Cleaning And Maintenance
This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it
yourself. Any servicing requiring disassembly other than cleaning, must be performed by a qualied
appliance repair technician. Always disconnect the appliance from the power outlet before cleaning.
1. Never immerse the kettle, power cord or power base in water, or allow moisture to come in contact
with these parts.
2. Wipe the body of the kettle with a mild, damp cloth or cleaner, never use an abrasive cleaner.
CAUTION: Do not use chemicals, steel wool, wooden or abrasive cleaners to clean the outside of
the kettle to prevent damage to the nish.
Note: keep illustration
callouts aligned
SO-315643_14753_Bella_Glass Kettle Copper_Amazon_IM_r3.indd 5 2019-06-17 1:04 PM
Loading ...
Loading ...
Loading ...