Loading ...
Loading ...
Loading ...
Page 9
TO DETACH BATTERY
PACK (FIG. 1)
1. Make sure that the variable-speed
trigger switch is in the OFF position and
the trigger lock is in the OFF position.
Depress the battery-release button
located on the battery pack to release
the battery pack.
2. Pull the battery pack out and remove it
from the blower.
ASSEMBLING THE BLOWER
TUBE (FIG.2)
This product requires assembly before
using. To prevent accidental starting that
could cause serious personal injury, always
remove the battery pack from the tool when
assembling parts.
1. Align the arrows between the blower
tube and the blower housing, and then
insert the tube into the blower housing.
2. To remove the blower tube, just pull it
straight out from the blower.
TO START/STOP THE BLOWER
(FIG. 3)
The variable-speed trigger switch can turn
the blower ON/OFF and deliver variable
speed. The blower is also equipped with a
trigger-lock lever to turn the blower ON/OFF,
and lock the blower at a chosen speed.
TO TURN THE BLOWER ON
1. To turn the blower ON, depress the
variable-speed trigger switch.
2. The variable-speed trigger switch
delivers higher speed with increased
trigger pressure and lower speed with
decreased trigger pressure.
3. To lock the blower on the chosen speed,
move the trigger-lock lever toward the
back of the tool.
ASSEMBLY
OPERATION
Trigger-lock
Lever
Variable-speed
Trigger Switch
FIG. 3
FIG. 2
Loading ...
Loading ...
Loading ...