Loading ...
Loading ...
Loading ...
Page 10
INSTALL THE BATTERY PACK
WARNING
• If the battery pack or charger is
damaged, replace the battery pack or the
charger.
• Stop the machine and wait until the
engine stops before you install or remove
the battery pack.
• Read, know, and do the instructions in
the battery and charger manual.
1. Open the battery door.
2. Align the lift ribs on the battery pack with
the grooves in the battery compartment.
3. Push the battery pack into the battery
compartment until the battery pack locks into
place.
4. When you hear a click, the battery pack is
installed.
5. Close the battery door.
REMOVE THE BATTERY PACK
1. Open the battery door.
2. Push and hold the battery release button.
3. Remove the battery pack from the ma-
chine.
I
NSTALL THE CHUTE CONTROL
ROD
1. Align the holes in the upper chute control
rod and lower chute control rod.
2. Put the hitch pin through the holes.
3. Align the arrows in the discharge chute
and snow thrower deck. Make sure that the
discharge chute faces forward.
4. Put the end of the chute control rod
straight through the hole in the bracket. Keep
the grip handle down.
5. Push the chute control rod into the hole be-
hind the deck.
6. Turn the grip handle left and right to make
sure that the discharge chute moves in the
same direction.
ASSEMBLY
Loading ...
Loading ...
Loading ...