Loading ...
Loading ...
Loading ...
4
EN
www.napoleon.com
N415-0416 APR 28.21
3/8” (10mm)
TOOLS REQUIRED FOR ASSEMBLY (tools not included)
GAS AND ELECTRICAL PIPING
The piping up to the gas grill is the responsibility of the installer and piping should be located as shown
in the built-in instrucons. Do not use hose to connect the unit. It must be connected with either rigid
pipe, copper tube or an approved exible metal connector. The installaon must comply with CAN B149.1
Natural Gas and Propane installaon code in Canada, or to the Naonal Fuel Gas code, ANSI Z223.1 in the
United States. The minimum recommended piping size is NPS 1/2” for rigid pipe, and 1/2” OD for copper
tubing (based on a 20 run). Longer runs may require larger sizes to conform with CAN B149.1. Propane
Gas Installaon Code in Canada or to the Naonal Fuel Gas Code, ANSI Z223.1 in the United States.
Look to the manual that came with the gas grill for further instrucons.
To ease installaon and piping, removable knockouts have been provided in the side panels and in the
center of each backpanel. The knockouts in the side panels should be removed before the cabinets are
bolted in a row. Only remove the knockouts that are required for the piping of any gas, plumbing or
electrical lines.
KNOCKOUTS
Loading ...
Loading ...
Loading ...