Loading ...
Loading ...
Loading ...
If the protective clear plastic film covering the front of
the eclectic fireplace has not been removed, please
carefully remove it at this time.
1) open the front glass doors.
2) Attached to each side of the inside walls
are the mesh curtains. Please use scissors
or wire cutters and carefully remove the zip
ties that are securing the curtains.
3) The curtains are inside of plastic bags,
please remove these bags carefully as they
may have oil on the surface. This oil is
used in the manufacturing process to help
the curtains inhibit rust.
4) Inside the curtain bag on the left side is
a smaller bag which contains a box. This
box contains the remote control
transmitter.
5) Remove the remote control transmitter
from the box and install the included
batteries. Follow the instructions in the
next section to operate the controls of
your electric fireplace.
CAUTION: Oil residue from the mesh curtains and the
packaging bags they are in can stain clothes, fabric
and carpet. Please take care when handling these
bags and dispose of them properly.
SECTION 2: PREPARING FIREPLACE FOR USE
Pre-Installation Diagram: Figure 1
REMOTE CONTROL
MESH CURTAIN IN PLASTIC BAGS
ZIP TIE
E-3
Loading ...
Loading ...
Loading ...