Loading ...
Self-Priming
Transfer Pumps
Table of Contents
Description .......................1
Unpacking .......................1
Safety Guidelines ..................1
General Safety Information ..........1
Installation .......................2
Operation ........................2
Maintenance......................3
Troubleshooting Chart ..............4
Replacement Part Information ......6-7
Warranty .........................8
Description
These self-priming transfer pumps are
designed to easily transfer water from
one point to another. Model PC1, 12 Volt
Transfer Pump is convenient when normal
power is not readily available. Typical
applications include removing water from
pool covers, clogged drains, stock tanks,
water basins, boats, cisterns, etc. Model
PC2, 115 Volt Transfer Pump is great for
household usage. Typical applications
include removing water from waterbeds,
clogged sinks, basements, etc. Note: Do
NOT use PC2 in pool areas. The motors
on both models PC1 and PC2 are non-
submersible.
General Safety Information
CALIFORNIA PROPOSITION 65
This product or
its power cord may
contain chemicals known to the State of California
to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
GENERAL SAFETY
Do not submerge
motor or allow motor to
be exposed to water. Personal injury and/or death
could result. Keep pump and power cords away
from liquids. Model PC1 becomes very hot during
operation.
Do not pump gasoline or other
explosive liquids. Do not operate
pump where flammable or explosive
fumes or gases are present as a
fire or explosion could result. Pump
should only be used to pump clear water. Do not
run pump dry.
1. Read all instructions before operation.
2. Protect electrical cord from sharp
objects, hot surfaces, oil
and chemicals. Avoid
kinking the cord and
replace damaged cords
immediately.
This pump has been
evaluated for use with
water only.
Models PC1 and PC2 include a six
foot long suction hose, a water suction
attachment, and a replacement parts kit
Unpacking
Inspect this unit before it is used.
Occasionally, products are damaged
during shipment. If the pump or
components are damaged, return the unit
to the place of purchase for replacement.
Failure to do so could result in serious
injury or death.
READ & FOLLOW ALL
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
DO NOT DISCARD
Safety Guidelines
This manual contains information that is
very important to know and understand.
This information is provided for
SAFETY and to PREVENT EQUIPMENT
PROBLEMS. To help recognize this
information, observe the following
symbols.
Danger indicates an
imminently hazardous
situation which, if not avoided, WILL result in
death or serious injury.
Warning indicates a
potentially hazardous
situation which, if not avoided, COULD result in
death or serious injury.
Caution indicates a
potentially hazardous
situation which, if not avoided, MAY result in
minor or moderate injury.
Notice indicates
important information,
that if not followed, may cause damage to
equipment.
NOTE: Information that requires special
attention.
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing
all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
For parts, product & service information
visit www.waynepumps.com
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
3212 08 -001 01/15
Operating Instructions & Parts Manual PC1 and PC2 Series
© 2015 WAYNE Water Systems
MANUAL
Loading ...
Loading ...
Loading ...