Loading ...
INDUCTION
COOKTOPS
www.hestanhome.com phone 888.905.7463
3375 E. La Palma Ave., Anaheim, CA 92806CONTACT US:
ELECTRICAL REQUIREMENTS
:
208/240V, 60Hz, 40 or 50 amps
Built - In
Models
Description
Approx
SHP WT (lbs)
KIC30-__ 30” Induction Cooktop
19
-⁄
KIC36-__ 36” Induction Cooktop
40 Amp
50 Amp19
-⁄
28
-⁄
34
-⁄
A (in.) B (in.)
Cutout Dimensions
_= BK (black glass nish) _=MS (metallic silver nish)
Circuit Breaker
Required
59
74
Hestan Indoor products are approved for indoor
use only. Hestan Commercial Corporation reserves the
right to change materials and specications without notice.
30” COOKTOP DIMENSIONS
30” 3/8
[771 mm]
21” 3/16
[538 mm]
1/4”
[6mm]
2” 5/8
[66 mm]
1” 1/16
[27 mm]
36” COOKTOP DIMENSIONS
36” 3/16
[919 mm]
21” 3/16
[538 mm]
1/4”
[6mm]
2” 5/8
[66 mm]
1” 1/16
[27 mm]
CUTOUT DIMENSIONS
LENGTH OF CUT
A
LENGTH OF CUT
B
1-1/2” [3.8cm]
MIN CLEARANCE
FROM EDGE OF CUTOUT
TO FRONT EDGE OF
COUNTE RTOP
2-1/2” [6.5 cm]
D
G
C
E
F
Cutout width D E F G
30”
[76.2cm]
18” [45.7 cm] min
Height from counter-
top to nearest cabinet
on either side of unit
2” [5 cm] min Clearance
from cutout to side wall
on the left and right of
the unit
13” [33 cm] Depth
of unprotected
overhead cabinets
36”
[91.4cm]
Cutout width A B C
30”
[76.2cm]
28-3/4” +/- 1/16”
[73.0 cm +/- 0.1cm]
19-7/16” +/- 1/16”
[49.4 cm +/- 1mm]
30”
[76.2 cm] min
36”
[91.4cm]
34-5/8” +/- 1/16”
[87.9 cm +/- 0.1cm]
19-7/16” +/- 1/16”
[49.4 cm +/- 1mm]
36”
[91.4 cm] min
NOTE: 24” [61 cm] min. clearance if bottom of wood or
metal cabinets is protected by not less than 1/4” [0.6 cm]
ame retardant millboard covered with no less than No. 28
MSG sheet steel 0.015” [0.04 cm] stainless steel, or 0.024”
[0.06 cm] aluminum or 0.020” [0.05 cm] copper. 30” [76.2
cm] min. clearance between top of cooking platform and
bottom of unprotected wood or metal cabinet.
Under the cooktop it is necessary to install a
partition, as shown.
WALL COVERING CABINETS,
AND COUNTERTOP MUST
WITHSTAND HEAT UP TO 200° F [93° C]
CUTOUT REQUIREMENTS
30” [76.2 cm] min.
[see note*] Clearance
from countertop to
unprotected
overhead surface
NOTICE
min
VERTICAL CLEARANCES
* The ventilation opening is to extend the full length of the cooktop cutout.
25” [635 mm]
min
”
2 1/2”
[64mm]
3
”
[76 mm]
2 1/2”
[65 mm]
1 5/8”
[40 mm]
max
1/4”
[6 mm]
min
36”
[915 mm]
24” [610 mm]
15 3/4”
[400 mm]
5”
[127 mm]
min
*1/4”
[6 mm]
min
min
19 7/16 [494 mm]
1 1/2
4 3/4
[120 mm]
[38 mm]
min
”
”
4”
[101 mm]
min
Partitian
021886 REV A