Loading ...
Loading ...
Loading ...
5
EXPLANATION OF SYMBOLS
Negative G round connection Positive Ground connection
Start vehicle and crank the engine in 2-3 second bursts. Do not crank the engine for more than 5 seconds.
Allow the booster battery to cool down after each boost.
If vehicle fails to start, turn OFF the ignition, disconnect the j umpstart system’s leads, and contact a quali-
fied technician to investigate why the engine did not start.
Finally, removecables in reverseorder of connection by discon
necting the engine block connection of the
formerl y stalled vehicle first, followed by the second post attached to of the booster batter,followed by the
first post attached to of the booster battery, and finally the post on the formerly discharged battery.
Maintenance
WARNING
Procedure not specifically explained in the manual must be performed only by a qualified
technician.
Make sure all four clamps are not connected to a wire or terminal before performing maintenance.
Allow contacts to cool down before handling. Safety gloves are strongly recommended.
After use, wipe the contacts clean with a dry cloth to remove any oil, liqui d, or other debris from the
surface of the contacts. Do not use any industrial cleaners or solven ts as this may corrode or damage the
contacts or coating.
Loading ...