Loading ...
Loading ...
Loading ...
19
EN
Notes on operation
1. The three cycles used for the rst time, the ice produced is small and irregular.
2. When the ice basket is full, please take out the ice immediately, do not let the ice
overow the ice basket.
CLEANING AND MAINTENANCE
1. Clean the inner liner, ice collecting tray, water box, ice shovel and evaporator
frequently. When cleaning, unplug the unit and remove the ice cubes. Use a diluted
solution of water and vinegar to clean the inside and the outside surface of the
Ice maker. Do not spray Ice maker with chemicals or diluted agents such as acids,
gasoline or oil. Rinse thoroughly before starting.
2. Keep ventilation openings in the appliance enclosure, or in the built-in structure,
clear of obstruction. Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the manufacturer.
3. If you have not used the appliance for a long time and put it back into operation,
the water pump may be lled with air and therefore not be able to pump enough
water. In this case, the “ADD WATER” indicator lights up. Press the POWER button
to restart the ice cube machine.
4. To ensure the cleanness of ice, please change water for water reservoir at least
once one day. If not used for a longer period of time, drain the water and clean the
water reservoir.
5. If the compressor takes a strike action for shortage water, full ice basket or
interruption of power supply, it will delay for 3minutes to start up after restarted.
6. Always use fresh water before starting ice production either at initial installation or
after a long shut-off period.
Loading ...
Loading ...
Loading ...