Loading ...
Loading ...
Loading ...
37
EN
Rinse the appliance twice according to the below procedure:
1. Fill the water reservoir (14) with clean water up to the maximum mark on the
water level indicator (15).
2. Place the empty coee pot (16) on the heating plate (18).
3. Switch on the appliance by pressing the on/o button (1).
4. Let all water run through the appliance. The appliance stops automatically
when the water reservoir (14) is empty.
After descaling:
1. Place the carbon lter holder (20) in the water reservoir (14).
2. Close the cover (24).
3. Switch o the appliance by pressing the on/o button (1).
4. Keep the coee quantity selector (3) and the coee strength selector (4)
pressed until the indicator (D) disappears from the display (8) (g. C).
5. Clean the outside of the appliance with a damp cloth. Dry the outside of the
appliance with a clean, dry cloth.
6. The appliance is ready for use.
Replacing the carbon lter
1. Open the cover (24).
2. If necessary, empty the water reservoir (14).
3. Remove the carbon lter holder (20) from the water reservoir (14).
4. Open the cover (25).
5. Remove the old carbon lter (26).
6. Place the new carbon lter (26).
7. Close the cover (25).
Note: The carbon lter holder must not be placed in the water reservoir before
the appliance has been descaled. This does not apply the rst time you put the
appliance into operation.
Loading ...
Loading ...
Loading ...