Loading ...
Loading ...
Loading ...
EN
W415-2782 / B / 07.20.20
13
installation
3.3 wall mount installation
It is strongly recommended that the mounting bracket be screwed into the wall studs where possible. If the wall
studs cannot be used, ensure that the supplied plastic anchors are used to affix the bracket to the wall and the
bracket is adequately secured.
note:
A x 6 for NEFL36/42/50CFH
A x 8 for NEFL60/72CFH
B x 6 for NEFL36/42/50CFH
B x 8 for NEFL60/72CFH
A. Select a location that is not prone to moisture and is located at least 36” (91.4cm) away from combustible
materials such as curtains, drapes, furniture, bedding, paper, etc.
B. Remove the front glass (see “front glass removal / installation” section).
C. Have two people hold the appliance against the wall to determine the final location.
D. Place the appliance face down on a soft, non-abrasive surface. Remove the bracket from the back of the
appliance by removing the screws (Fig. 3-1). Set the bracket aside and discard the screws.
E. Mark out location, then mount the bracket onto the wall using screws (supplied). This bracket MUST have
the hooks facing upwards and be level (Fig. 3-2i and Fig. 3-2ii, next page).
NEFL36/42/50CFH
Bracket Illustrated
NEFL60/72CFH
Bracket Illustrated
NEFL100CFH
Brackets Illustrated
Fig. 3-1
A x 16 for NEFL100CFH
B x 16 for NEFL100CFH
NEFL36/42/50CFH
Bracket Illustrated
NEFL60/72CFH
Bracket Illustrated
NEFL100CFH
Brackets Illustrated
Fig. 3-2i
Due to the many different materials used on different walls, it is highly recommended that you consult your local
builder before you install this appliance on the wall.
Loading ...
Loading ...
Loading ...