Loading ...
Loading ...
Loading ...
22
CARE AND MAINTENANCE
• Make sure the unit is turned OFF, unplugged and the heating elements of heater are cool whenever you are cleaning
the heater or fireplace.
• Clean the metal trim using a water-dampened soft, clean cloth. DO NOT use brass polish or household cleaners as
these products will damage the metal trim.
• The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and
require no further lubrication. However, periodic cleaning/vacuuming of the fan/heater and air intake/output vents are
recommended.
• When the heater is not in use, the power cord should be stored properly to avoid contact with hot or sharp objects.
• Any other servicing should be performed by an authorized service representative.
• Tips for using touch-up pen (LL): For scratches, stroke in direction of scratch. For worn areas, stroke in the direction of
wood grain. Rub excess colorant promptly with a soft cloth.
• The furnishing has no user serviceable parts.
Replacing the Remote-Control Batteries
When the remote control (N)/sound system remote control (S) stops operating or its range seems reduced, it is time to
replace the batteries.
Note:
The batteries should be removed if the product is to be left unused for a long time.
1. The battery compartment is located on the back end of the
remote control (N).
2. Press the small tab inward as you slide the battery door open
and remove the old battery.
3. Insert a new CR2025 lithium battery (not included), checking
that the + and - sides of the battery match the inside of the
battery compartment.
4. Re-insert the battery door.
BATTERY
N
1. The battery compartment is located on the back of the sound
system remote control (S).
2. Remove battery cover from the back of sound system remote
control (S) and remove the old batteries.
3. Insert 2pcs AAA batteries, ensuring the polarities of the battery
match the inside of the battery compartment.
4. Re-insert the battery door.
AAA 1.5V
AAA 1.5V
S
Note:
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon zinc), or rechargeable (nicad, nimh, etc) batteries.
Non-rechargeable batteries are not to be recharged. Exhausted batteries are to be removed from the product.
Harmful if swallowed.
Loading ...
Loading ...
Loading ...