Loading ...
Loading ...
Loading ...
8
|
ENGLISH
AUTO SHUT-OFF
The Auto Shut-Off feature deactivates electrical power to the heater when the Pressing
Plate has been left in closed position against the Ironing Board. The Pressing Indicator
Light (Orange) and Steam Burst Ready Indicator Light (Orange) does not illuminate. Heater
functionality is restored when the Pressing Plate is lifted back up.
IMPORTANT: Auto Shut-Off does not mean that power to the unit is totally cut off. Power
is always on, and the Power Indicator Light will remain illuminated until On/Off Switch is
set to “Off” (O) position (FIGURE 1, page 6).
CLEANING THE MID-SIZE FABRIC STEAM PRESS
1. Fill Water Reservoir with water using procedure on page 6 of this manual.
2. Place Pressing Cushion in the middle of Ironing Board.
3. Place a clean towel over Pressing Cushion and Ironing Board.
4. Set Temperature Control Dial to the highest setting (LINEN).
5. When Steam Burst Ready Indicator Light illuminates, lower Pressing Plate onto
Pressing Cushion.
6. Press Steam Burst Button six times.
7. Allow Pressing Plate to cool.
8. Clean Pressing Plate with damp cloth. Do not use abrasive materials, as this may damage
Pressing Plate.
9. Ironing Board Cover is removable for cleaning. Hand wash only with mild detergent.
PROPER STORAGE
1. Once pressing is complete, immediately turn unit off and unplug power cord from
electrical outlet.
2. Allow unit to cool completely (at least 30 minutes).
3. Lower Pressing Plate down, and turn Locking Knob to “Lock” position.
4. Store all accessories safely away, preferably near Mid-Size Fabric Steam Press.
5. Store Mid-Size Fabric Steam Press in a cool, dry place.
Storage & Care
Loading ...
Loading ...
Loading ...