Loading ...
Loading ...
Loading ...
19
EN
ASSEMBLY
Installing the Base
• Turn the adjustment knob on the lower tube counterclockwise. Pull the upper tube
out of the lower tube as far as it will go. Then tighten the adjustment knob clockwise.
• Remove the screw from the base.
• Place the lower tube on the recess in the base.
• Connect the base to the lower tube by retightening the screw.
Installing the motor housing
• Loosen the adjustment knob on the motor housing.
• Place the motor housing on the upper tube and tighten the adjustment knob again.
Lower tube
RecessScrew
Adjustment knob
Adjustment knob
Place the
housing on the
tube
Loading ...
Loading ...
Loading ...