Loading ...
Loading ...
Loading ...
33
EN
TROUBLESHOOTING
Problem Possible cause Suggested solution
The device is not running. The plug has not been
plugged in.
Insert the plug.
The display shows FL. Drain the water and then
restart the appliance.
The timer has expired. Wait 3 minutes and then
restart the appliance.
The unit goes off and on
all the time.
The unit is in direct sunlight. Close the curtain.
Doors and windows are
open. There are heat
sources in the room.
Close doors and windows
and remove heat sources.
The lter is dirty. Clean the lter.
The air inlets or outlets are
blocked.
Clean the air inlets or
outlets.
The unit makes loud
noises.
The unit is not level. Place the unit on a level
surface.
The compressor is not
running.
The unit has just been
switched off.
Wait 3 minutes and then
restart the unit.
Error codes
E1 The evaporator coil sensor is
broken.
Have the sensor replaced by a specialist
company.
E2 The room temperature sensor
is broken.
Have the sensor replaced by a specialist
company.
E4 Frost protection: The coil
temperature is too low and
the entire air conditioning
system is switched off.
If the temperature rises above 8 °C again,
the protection is deactivated and the previous
operating state is automatically restored.
Loading ...
Loading ...
Loading ...