Loading ...
Loading ...
Loading ...
12
Assembly Instructions
NOTE: The doors are shipped with Wood Door Panels (M). You can keep the doors as they are or
interchange with the Door Glass Inserts (N) depending on your configuration.
20. To change the configuration, loosen the screws on the inside of Door Panels (L) and rotate the clips to
remove the door insert panel. Replace with the desired panel, then rotate clips to secure the panel within
the door frame and tighten screws.
21. Pick up one Door (L) and attach it to Left Lower Side Panel (F) by engaging both door hinges together.
Please follow the steps below to combine the door hinges together.
a). Extend both hinge arms of the Door (L) to open position, if needed.
b). Locate the lugs on the mounting plates pre-attached on the Left Side Panel (F) into the “J” hooks
beneath the hinge arms.
c) Press lightly on the end of both hinge arms to engage the catch.
d) To remove the hinge arms from the mounting plates, press gently in the release lever on the back of
hinge arms.
22. Repeat the same process to install the other Door (L) to the Right Lower Side Panel (H).
23. Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the
screws for a good fit. Refer to the hinge sticker on door for adjustment
L
1
2
H
F
L
L
M
N
Loading ...
Loading ...
Loading ...