Loading ...
Loading ...
Loading ...
English
1
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery operated
(cordless) power tool.
SAFETY INSTRUCTIONS
The product is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the product by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the product.
Please read and observe these instructions before using
the product.
When battery pack is not in use, keep it away from
other metal objects such as paper clips, coins, keys,
nails, screws or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
sparks, burns or fire.
Do not place battery tools or their batteries near fire
or heat. This will reduce the risk of explosion and
possible injury.
Do not crush, drop or damage battery pack. Do not use
a battery pack or charger that has been dropped or
received a sharp blow. A damaged battery is subject to
explosion. Properly dispose of a dropped or damaged
battery immediately.
Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk
of serious personal injury, never use any cordless
product in the presence of open flame. An exploded
battery can propel debris and chemicals. If exposed,
flush with water immediately.
Do not charge battery tool in a damp or wet location.
Following this rule will reduce the risk of electric shock.
For best results, charge the battery tool in a location
where the temperature is more than 10°C but less than
37°C. To reduce the risk of serious personal injury, do
not store outside or in vehicles.
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with the skin, wash immediately with soap and water,
then neutralize with lemon juice or vinegar. If liquid
gets into the eyes, flush them with clean water for
at least 10 minutes, then seek immediate medical
attention. Following this rule will reduce the risk of
serious personal injury.
OPERATION
Use the battery pack for Ryobi One+ 18V cordless
products only.
BATTERY PROTECTION FEATURES
Ryobi One+ 18V lithium-ion battery packs are designed
with features that monitor and protect the lithium-ion cells
(active, standby, shut off and sleep modes ) and maximize
battery life.
The tool may stop during use to prevent overheating or
overloading of the battery (active mode). In this case,
release the trigger to reset and resume operation.
If this does not reactivate the tool, the battery is
completely discharged (stand-by or sleep mode) and
needs to be charged in a compatible charger.
The battery can be recharged in stand-by or sleep
mode. It is not necessary to completely discharge the
battery pack before recharging.
NOTE: A completely discharged battery (sleep mode)
needs reactivation before the charging process begins. To
reactivate a battery in sleep mode, place the battery in the
charger and wait for 90 seconds. If the charging process
does not begin, please remove the battery and wait for 30
seconds. Then start a second attempt to re-activate the
battery by placing it in the charger. If the charging process
does not begin after 3 attempts, the battery may be faulty.
In this case, have the battery serviced by a qualifi ed repair
person using only identical replacement parts.
NOTE: The LED charge indicator light will not work if the
battery protection feature has caused the battery pack to
stop powering the tool (sleep mode). When the charger
resets the battery pack, the LED will again function.
The One+ 18V lithium-ion battery packs are equipped
with an additional SHUT-OFF mode, minimizing self-
discharge of the battery while the battery is not in use.
It will be reactivated automatically when used with a
tool or by pressing the LED gauge.
NOTE: In SHUT-OFF mode, the battery will show low
voltage when tested with a volt-meter. Use the battery
in a tool or press the LED gauge for read-out of the
actual voltage.
COLD WEATHER OPERATION
The lithium-ion battery pack can be used in temperatures
down to -10°C. Put the battery pack on a tool and use the
tool in light duty application. After a while, the battery pack
will warm up and begin operating normally.
CHARGING THE BATTERY PACK
Battery packs are shipped in a low charge condition to
prevent possible problems. Therefore, they should be
charged prior to fi rst use.
NOTE: If the charger does not charge the battery pack
Loading ...
Loading ...
Loading ...