Loading ...
6. Be careful not to puncture the screens on the hair chamber while emptying the unit.
7. The mesh side of the vacuum chamber can be opened to aid in hair removal and
cleaning of the mesh.
The mesh can be brushed or rinsed under water to be cleaned; however it needs to be
completely dry before it is reattached to the unit.
8. Once finished emptying, place the chamber back onto the unit by putting the scoop
end in first and then gently rotating the mesh end back into place until it clicks.
for any uneven areas. For styled hair or giving quick trims, you may prefer using
your hair clipper without the trimming guide.
• Use the clipper without a guide comb for close trimming around the base and
sides of the neck.
• To produce a clean straight line at the sideburns, reverse the hair clipper.
• Place the reversed clipper at right angles to the head, tips of the blades lightly
touching the skin and then work downwards.
Longer Styles
• For optimum performance do not trim hair 18mm or longer with one pass of the
clipper.
• When cutting hair 18mm or longer use a finger on your free hand in between the
comb and clipper to guide hair into the blade by applying slight pressure. As you
move the clipper up to cut, your finger will help keep the longer hairs from slipping
away before they can be cut. If the hair extends well past the hair collection
chamber opening, place your finger on top of the chamber near the opening.
Short Tapered Styles – “Flat Tops” and Short Cuts
• Starting with the longest guide comb attached (25mm),
cut from the back of the neck to the crown. Hold the guide
comb flat against the head and slowly move the clipper
through the hair.
• Use the same procedure from the lower side to the upper
side of the head.
• Then cut the hair against the direction in which it grows and level with the sides.
• To give a “flat top” look, the hair on top of the head must be cut over the top of a
flat comb.
• Use a closer guide comb to taper the hair down to the neckline as desired.
Emptying Hair Chamber:
1. Turn off the unit.
2. Hold the unit from the back end of unit, cradling the bottom with one hand.
3. Push the chamber release button with your gripping hand thumb and with your
other hand rotate and then lift the chamber off.
4. To empty contents grip the chamber securely in hand with opening facing down
over desired collection container. Shake chamber up and down, but stopping
rapidly on the down stroke. This may have to be repeated several times.
5. You may have to vigorously shake the chamber or scoop out some of the
compacted hair clippings.
Giving A Comfortable, Even Cut
■ Allow the clipper to cut through the hair without moving it too quickly. Moving the
clipper too quickly may create a pulling sensation. As the clipper cuts the hair, the
vacuum sucks the clippings through the inlet into the hair chamber.
■ Use short strokes when cutting, and initially use the longest trimming guide. You
can always use a closer trimming guide later if you want a closer cut.
How to Give a Haircut
STEP 1 – Nape of the neck
• Set the comb to 3mm or 6mm.
• Hold the clipper with the blade teeth pointing upwards. Begin
starting at the centre of the head at the base of the neck.
• Slowly lift the clipper, working upwards and outwards
through the hair, trimming just a little at a time.
STEP 2 – Back of the head
• With the comb set at 12mm or 18mm, cut the hair at the back of the head.
STEP 3 – Side of the head
• With the comb set at 3mm or 6mm, trim sideburns. Then change to the longer
9mm guide comb and continue to cut up to the top of the head.
• To trim around the ears, remove the trimming guide and replace with either the
left or right ear guide. The shorter guide teeth are designed to be toward the ear.
Move the clipper from the front of the head to the back. This creates a tapered
effect around the ear and back of the neck.
STEP 4 – Top of the head
• With the 18mm or 22mm guide comb attached, cut hair
on top of the head against the direction in which the hair
normally grows.
Note: For longer desired lengths of more than 22mm, place
finger over hairs and guide into the guide comb and blade to
better guide the hair trimmings into the vacuum chamber.
• Always work from the back of the head.
STEP 5 – The finishing touches
• The final trim can be made with the hair clipper or the
included scissors. Make sure to check over the entire head
Cleaning and Maintenance
Troubleshooting
Battery
Battery Removal
When your rechargeable clipper reaches the end of its useful life, the batteries
must be removed and recycled or disposed of properly in accordance with your
local and state requirements.
The following should be followed for battery removal:
■ Ensure device is unplugged from any electrical outlet and discharged of all power.
■ Remove blade for ease of disassembly and safety by following instructions for
blade removal (see Blade Removal section).
■ Remove vacuum chamber by following instructions for emptying chamber.
■ Using a small screwdriver, remove 3 screws at the top of clipper where the
vacuum chamber was.
■ Using a small screwdriver, remove 2 screws at the bottom of the unit near the
back (plug end).
■ Pry the top housing, starting from the back (plug end). There are snaps help-
ing to hold down the housing at the side grips on both sides. Once the snaps
are disengaged, then rotate housing up. This will allow the panel to be
removed off the latches near the front (blade end).
■ The printed circuit board and batteries are located underneath this panel.
■ Cut or break the wire stamps on both ends of the batteries and remove the batteries.
■ The battery is to be disposed of safely.
Note: This clipper is not intended for professional use.
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to faulty
material or workmanship for a two-year period from the original date of consumer
purchase. This warranty does not include damage to the product resulting from
accident or misuse. If the product should become defective within the warranty
period, we will replace it free of charge. Return your product and sales receipt with
your name, address and day time phone number to: Remington Returns Center, 507
Stokely Dr., P.O. Box 1, Deforest, WI 53532
. For more information call 800-736-4648
in the US or 800-268-0425 in Canada.
Warranty excludes: Storage pouch
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY
PURPOSES.
Warranty
This warranty does not cover products damaged by the following:
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
■ Wrapping cord around appliance causing premature wear and breakage
■ Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or mainte-
nance of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product,
you are not satisfied and would like a refund, return it with the sales slip indicat-
ing purchase price and date of purchase to the retailer from whom it was pur-
chased. Spectrum Brands, Inc. will reimburse all retailers who accept the product
within 30 days from the date of purchase. If you have any questions concerning
the money-back guarantee, please call 800-736-4648 in the US or 800-268-0425
in Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington Men’s Shave and Groom 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
branded Men’s Shave and
Groom product, you are not completely satisfied and would like a refund, return
it with the original dated sales receipt directly to Remington and receive a full
refund.** For questions concerning the money-back guarantee, please call 800-
736-4648 in the US or 800-268-0425 in Canada.
*Applies to US and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington
®
branded Men’s Shave and
Groom product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned product
was used in accordance with the instruction booklet (included with the product
at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4–6 weeks to receive your refund by check.
Questions or comments: Call 800-736-4648 in the US
or 800-268-0425 in Canada or visit RemingtonProducts.com.
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
Dist. by:
Spectrum Brands Canada Inc.
131 Saramia Crescent
Vaughan, ON L4K 4P7
® Registered Trademark of Spectrum Brands, Inc.
© 2015 Spectrum Brands, Inc. 6/15 12869-00
Made in China.
T22-0003514
Contains a listed adaptor.
1) Press to release.
Mesh Release Tab
2) Then, Grip/Push to
swing mesh open.
Mesh is hinged to swing
open and closed.
Clipper does not work when turned on:
■ Clipper must be charged for a full 3–5 hours.
Clipper cutters do not move:
■ The cutting unit may be dirty and clogged. Clean the unit as directed in Cleaning
and Maintenance section.
Vacuum not functioning properly:
■ Ensure that the chamber has been emptied and correctly placed back into
the unit.
■ Check for obstructions in the inlet and air flow path.
Fan chamber clogged up:
■ Remove the hair chamber.
■ Using the cleaning brush that has been provided, gently brush between the
protective exhaust vents. If necessary, blow into the fan chamber. Hair clippings
should become loose and fall out.
Cleaning and Maintaining Your Clipper
After each use:
■ Brush the accumulated hair from the cutters.
■ Rinse blade.
Rinsing your blades
- Turn off clipper and detach blades. Rinse the inside of the blades.
- Ensure all loose hairs are removed from the blades.
- Once blades are cleaned, ensure the blades and unit are thoroughly
wiped dry.
Caution: Do not rinse the clipper. Only rinse the blades.
■ Place a few drops of clipper oil onto the blades gliding surface. Wipe off
excess oil.
Every Six Months
■ At regular intervals the blade set should be removed and cleaned.
■ Brush out hairs from between the blades with soft cleaning brush. Do not
remove the lubricating grease on the plastic components. It is not necessary
to remove the small moving blade from the unit.
■ Place a few drops of clipper oil onto the blades gliding surface. Wipe off
excess oil.
Cleaning Cautions:
■ Do not use liquid cleaners on the cutters or harsh or corrosive chemicals on the
cutter casing.
■ Unplug the clipper from the power outlet when not in use and when cleaning.
Storage
■ Always store this appliance and cord in a moisture-free area.
■ Do not wrap the cord around the appliance.
■ Do not store in temperatures above 140ºF.
Blades
■ It is recommended to oil the blades after every use.
■ Place 2 to 3 drops of lubricating oil on the moving blade and turn on the
clipper. The oil should distribute on its own. Wipe off any excess oils.