Loading ...
Loading ...
188
1
2 3
Terminal
Block
Mains
Cable
105
116
Controls Cleaning and User Maintenance
Fig. 2
WARNING: Before undertaking cleaning or maintenance work on
the appliance disconnect the electricity supply by switching o at
the adjacent double pole switch.
NOTE: If the operation of the product has been stopped during a
runback period then switched back on, the runback timer will revert
back to the maximum 30 minute duration
The heater can be switched on or o via the pull cord operation. The
heater comes pre-programmed with a 30-minute runback timer. At the
end of the runback period, the appliance can be restarted by pulling the
cord twice; the red neon light will extinguish after the first pull, and will
light up again after the second pull. The operation of the product can
be stopped at any time during the 30 minute runback period by pulling
the pull cord once, extinguishing the neon light. Pulling the cord again
will restart the heat and fan, along with the red neon light.
The outside can be cleaned by wiping it over with a soft damp cloth and
then dried. Do not use abrasive cleaning powders or furniture polish as
this can damage the surface finish. Ensure that dust or flu does not
accumulate inside the heater as this could lead to overheating of the
element. Use a vacuum cleaner to remove any flu which does accumulate.
Loading ...