Loading ...
Loading ...
Loading ...
10
Assembly Instructions
18. Ask for assistance to lift the assembly unit upright and position it near the final installation location.
19. Pick up one Door (K) and attach the extended hinge arms to the mounting plates installed on the one
Side Panel (D). Please follow the steps below to combine the door hinges together.
a). Extend both hinge arms of the Door (K) to open position.
b). Locate the lugs on the mounting plates pre-attached on the Side Panel (D) into the “J” hooks
beneath the hinge arms.
c) Press lightly on the end of both hinge arms to engage the catch.
d) To remove the hinge arms from the mounting plates, press gently in the release lever on the back of
hinge arms.
20. Repeat the same procedure to install the other Door (K) to the other Side Panel (D).
21. Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the
screws for a good fit. Refer to the hinge sticker on door for adjustment.
22. Open the doors and attach one Handle with Metal Plate (9) to the front side of each Door (K) with two
22 mm Bolts (10).
K
10
9
K
K
D
K
K
D
D
K
Loading ...
Loading ...
Loading ...