Loading ...
Loading ...
Loading ...
EN
W415-2007 / D / 04.28.21
29
maintenance
Ensure the door latch closes and engages
properly. Re-install the surround.
5 6
7 8
Rotate the top and botom hinge pin until it is
centered on each hinge block. tighten the set
screws.
To align the door, loosen the set screws. Rotate
the hinge pins clockwise or counter-clockwise to
raise or lower the door. Tighten the set screw. Door
adjustment is strictly trial and error; you may need
to perform this adjustment a few times until the
desire door angle is attained.
SET SCREW
HINGE PIN
Lift the door onto the appliance. close the door
to check alignment. Door adjustment may be
necessary if door is not level.
SET SCREW
HINGE PIN
Loading ...
Loading ...
Loading ...