Loading ...
SPECIFICATIONS
FCC
1. FCC Caution:
“Changes or modications not expressly approved by the part responsible for compliance could void the user’s authority to operate the
equipment.”
2. FCC Statement:
“This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.”
IC
RSS-Gen & RSS-210 statement:
“This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.”
RSS-102 Statement:
“This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé.”
CAUTION
1 Do not expose your keyboard to heat, re, or water.
2 Do not modify, disassemble, open, drop, crush the keyboard
.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
Bluetooth specication
Operation current
Standby current
Operation voltage
Charging voltage
Battery type
Charging period
Version 3.0
<1.5mA
<0.5mA
3.7V
DC 5V
Lithium battery
2 hours (For the rst time, charge for 12 hours)
V1 ENGLISH 14-0934
LEDs
USING YOUR FOLIO
• Prop your tablet up on one of the three ledges for the best viewing angles.
TROUBLESHOOTING
PROBLEM:
No power
Keyboard will not pair
Keys are reacting slowly
or skipping
SOLUTION:
• Make sure that your keyboard is charged.
• Make sure that your keyboard is turned on.
• Shorten the distance between your keyboard and tablet.
• Turn your devices o, then on. Re-pair your keyboard and tablet.
• Make sure that your keyboard or tablet is not paired to another device.
• Make sure that your keyboard and tablet are in pairing mode.
• Make sure that your tablet supports Bluetooth 3.0.
• Make sure that you selected Bluetooth Keyboard from the device list.
• Make sure that you input the password that displayed on your tablet correctly,
then press enter on your keyboard.
• Your keyboard battery may be low. Charge the battery.
• Shorten the distance between your keyboard and tablet.
Icon
Description
• Caps lock is turned on.
• Blinks yellow when the battery is low.
• Lights red when the battery is being charged.
• Lights green when the battery is fully charged.
• Blinks when in pairing mode.
• O when the keyboard is successfully paired to a tablet.