Loading ...
Loading ...
Loading ...
19
EN
MANUAL ADJUSTMENT OF THE
FILLING QUANTITY
For each menu below, this unit enables the user to set the size to their desired amount:
• Espresso, double Espresso and Milk foam
• Cappuccino and Latte
Steps to set Espresso, double Espresso and Milk foam:
1 The unit will enter pre-heating rst after power on. All lighting will ash. Wait till the
lights become solid. Then start to set the size.
2 Push & keep pressing the button(Espresso, double espresso, milk foam) you will
hear 3 beeps.
3 Holding the button for more than 3S until the desired quantity is reached. Then
release the button, the quantity will automatically be saved for next time use.
Steps to set Cappuccino and Latte:
1 The unit will enter pre-heating rst after power on. All lighting will ash. Wait till the
lights become solid. User can then start to set the size.
2 Push either Capp or Latte button rst to enter the Capp or latte menu.
(A) Press the button again and hold it for more than 3s to start the milk foam size
setting. Release the button until the desired milk foam quantity is reached.
(B) The unit then goes on for coffee brewing. Press down & hold the button again
to set the coffee size. Release the button when the desired quantity of coffee
size is reached.
3 The quantity of Capp or Latte is automatically saved for next time use.
How to reset to Default +
• Make sure the machine is in off state but power on.
• Press and hold Espresso & double espresso buttons
• Press on/off button. All ve lighting ash & 5 beeps mean that factory default
setting is achieved.
• Release the buttons
Loading ...
Loading ...
Loading ...