IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance,
basic precautions should always be
observed, including the following.
Read all instructions before using
this appliance.
DANGER
To reduce the risk of electric shock:
■ Do not reach for an appliance that
has fallen into water. Unplug it
immediately.
■ Do not use while bathing or in
the shower.
■ Do not place or drop into water
or other liquid.
■ Do not place or store this appliance
where it can fall or be pulled into a
tub or sink.
■ Always unplug this appliance from
the electrical outlet immediately
after using.
■ Unplug this appliance before
cleaning it.
WARNING
To reduce the risk of burns, fire,
electric shock or injury to persons:
■ This appliance is for household
use only.
■ An appliance should never be left
unattended when it’s plugged in.
■ Close supervision is necessary
■ Do not place this appliance on any
surface while operating.
■ This appliance has a polarized plug
(one blade is wider than the other).
As a safety feature, this plug will
fit in a polarized outlet only one
way. If the plug does not fit fully
in the outlet, reverse the plug. If it
still does not fit, contact a qualified
electrician. Do not attempt to
defeat this safety feature.
■ Do not use this appliance with
a damaged or broken cutting
unit, as injury may occur.
Always make certain blades are
aligned properly.
■ This clipper is designed for use
with 120 Volts AC, 60 HZ electrical
outlets available on the continent
of North America. It does not have
worldwide voltage adaptability. Do
not connect the clipper to a higher
voltage than indicated, as it may
result in personal injury and/or
damage to the clipper.
when this appliance is used by,
on, or near children or persons
with special needs.
■ Use this appliance only for its
intended use as described in this
manual. Do not use attachments
not recommended by Spectrum
Brands, Inc.
■ Keep the cord away from heated
surfaces.
■ Never operate this appliance if it
has a damaged cord or plug, if it is
not working properly, if it has been
dropped or damaged, or if it has
been dropped into water. If any
of these things happen, return
the appliance to a Remington
authorized service center for
examination and repair.
■ Never drop or insert any object into
any of the appliance’s openings.
■ Do not use outdoors or operate
where aerosol (spray) products are
being used, or where oxygen is
being administered.
■ Always store this appliance and
cord in a moisture-free area.
Do not store it in temperatures
exceeding 140°F (60°C).
■ Do not plug or unplug this appliance
when your hands are wet.
■ Do not use an extension cord
or a voltage converter with this
appliance.
SAVE THESE INSTRUCTIONS
How to Use
Line Cord Safety Tips
NOTE: This appliance has a polarized
plug (one blade is wider than the
other). As a safety feature, this plug
will fit in a polarized outlet only one
way. If the plug does not fit fully in
the outlet, reverse the plug.
If it still does not fit, contact a quali-
fied electrician. Do not attempt to
defeat this safety feature.
1. To insert plug, grasp it firmly and
guide it into outlet.
2. To disconnect the appliance, grasp
the plug and remove it from outlet.
Do not pull or yank on the cord or
appliance. Do not wrap the cord
around the appliance.
Blade Care
The life of your clippers will depend
on frequency of use, care, hair type
and condition. The hair clipper has
blades that require additional oiling.
To maintain the blades in peak con-
dition apply oil after every haircut.
Place a few drops of the included oil
on the teeth of the blades. Turn the
clipper on for fifteen seconds then
turn off. Wipe away any excess oil.
Use and Care Guide
HC1080 Series
Save Money
Cut Hair at Home
Before Cutting Hair
1. Make sure your hair clipper is
running smoothly, with a slight
vibration.
2. Place a cape or towel around the
neck of the person whose hair is
being trimmed or cut.
3. This person should be seated so
that the top of their head is at your
eye level.
4. Comb the hair as it is normally
styled.
5. Comb out all knots and tangles.
6. Ensure the hair is dry. Hair clippers
perform best with dry hair, making
it easier to see how much hair is
being cut.
7. Hold the hair clipper in the palm of
one hand with your thumb resting
firmly on the top of the hair clipper.
This grip provides comfortable
cutting control. Although the hair
clipper may be used with the left
or right hand, using it right-handed
allows you to access the taper
lever more easily.
To Attach Trimming Guides
1. Select the trimming guide that
matches the length you want
the hair to be after the cut. The
trimming guides are numbered
and marked. See preceding chart
to determine which combs your
model contains.
2. While the clipper is off, hold the
trimming guide with the teeth up.
Hook the front edge of the comb to
the teeth of the clipper blade. Then
push the back of the comb down
until it snaps in place.
1
Register Your New Product Today!
By registering your new Remington
®
product, you will receive special offers.
Register online at: RemingtonProducts.com
Product Features
Congratulations on your purchase of one of the finest hair clippers available
today. Your Remington
®
hair clipper is designed to perform dependably and
efficiently for years, helping you maintain a range of hair styles.
Part HC1080 HC1081 HC1085
1. Hair Clipper x x x
2. 1/8” (3mm) Guide Comb x x x
3. 1/4” (6mm) Guide Comb x x x
4. 3/8” (9mm) Guide Comb x x x
5. 1/2” (12mm) Guide Comb x x x
6. 5/8” (16mm) Guide Comb x x x
7. 3/4” (18mm) Guide Comb x x
8. 7/8” (22mm) Guide Comb x x x
9. 1” (25mm) Guide Comb x x
10. Left Ear Guide x x x
11. Right Ear Guide x x x
12. Neck Brush x x
13. Sectioning Clips 2 4 3
14. Barber Comb x x x
15. Styling Comb x x
16. Blade Guard x x x
17. Barber’s Cape x
18. Oil Bottle x x
19. Scissors x x x
20. Cleaning Brush x x x
21. Storage Case
x x x
2
9
14 15
16
18
19
20
17
21
3
10
4
11
5
12 13
6
7
8
Loading ...
Loading ...
Loading ...
