Loading ...
Loading ...
Loading ...
9
EN
OPERATION
1. After removing the packaging materials, there should be 2 items:
• Mini dehumidier
• AC wire
2. Plug the output of AC wire cord to the AC power socket, then connect the
input plug to the appropriate main socket.
3. Press the “ON/OFF” button to “ON” position, the mini dehumidier will begin
to operate. The green LED will be turned on. Listen and feel for the air blowing
from dry air outlet.
4. To switch o the unit, press “ON/OFF” button to “OFF” position, the mini
dehumidier will be turned o.
5. The dehumidier have Air fresh function, when the dehumidier is turn on,
the Air fresh function will start work, and the two sides LED will be turn on.
6. The dehumidier have auto-stop function. When the water tank is full, the
dehumidier will auto-stop, and the Red Led will turn on.
MAINTENCANCE AND CLEANING
Removable water tank
When the water tank is full, with approximately 1500 ml to 2000 ml of water
collected, the unit will auto- matically switched o and the „Red“ LED will come on.
To remove the water tank, rst switch o the mini dehumidier, press „ON/OFF“
button to the „OFF“ posi- tion. Then remove the water tank from the unit and pour
the water out to the toilet or bathroom. Put the water tank back into the unit. To
continue dehumidifying, press the „ON/OFF“ button to the correct position again.
Cleaning
Before cleaning the unit, turn o the mini dehumidier and unplug the AC plug
from the main socket rst. Use a soft cloth to clean the surface of the unit and a
soft bristled brush to remove dust from the air inlet and outlet grills.
Loading ...
Loading ...
Loading ...