Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE
ENVIRONMENTAL PROTECTION
SAFETY INSTRUCTIONS
Clean and maintain your clipper.
Warnings - to reduce the risks of burns, electric shock, fire or personal injury:
n
After use
Turn off the clipper.
Gently brush off the remaining hair. It is recommended to wash the comb and
blade with warm water.
n
Cleaning precautions
Only soft brush is used for cleaning, such as the brush provided in the package.
It is recommended to use the lubricating oil attached in the kit or that for
professional sewing machines.
Do not clean the the unit or blade with irritant or corrosive detergent.
The clipper can be washed in water all over, but please dry the charging port
before charging to avoid accidents.
n
Storage
Please put the appliance and adapter in a dry and ventilated place. And Keep the
temperature under 140 ° F (60 ° C).
Do not wrap the cord of the charging adapter around the appliance.
When the appliance is plugged into the power socket, it must be watched out.
Keep the plug and electrical cord away from heated surfaces.
Make sure that the plug and cord are free from moisture.
Do not plug or unplug the appliance with wet hands.
Please don't use the appliance with a broken cord. Please contact the seller to
purchase a new cord.
Please charge it, use it and keep it stored at 15-35°C.
Remember to unplug the appliance when cleaning it.
Only the attachments provided with the appliance should be used.
Keep the clipper out of the reach of children. People with reduced physical,
sensory or mental capabilities or lack of experience are not recommended
to use it. Otherwise it may lead to a dengerous situation.
Please handle the battery properly when discarding the clipper. Otherwise
it may cause environmental pollution.
You can seek advice from our service center or from your local solid waste
management department.
Note: Do not put the battery into the fire, otherwise it may burst or be
damaged to release toxic substances.
Do not discard electrical appliances together with general household
waste. Please send them to official recycling facilities for the sake of
environmental protection (Fig.25).
BATTERY DISPOSAL
Take the battery out of the shell with scissors and disconnect the battery and
the appliance by cutting the connecting wires (Fig. 26).
Batteries must be removed from the appliance before discarding.
1. Unplug the clipper from the socket to avoid the risk of electric shock.
2. Screw out the back screws with a screwdriver; pry open the shell; screw
out the screws on the circuit board; find the connecting wires on the
battery, and cut them.
3. Clamp the wire connecting the battery with steel wire pliers.
4. Batteries removed from the appliance should be disposed of properly as
per local regulations.