Loading ...
Loading ...
Loading ...
8
NS-DACMSFK/NS-DACMSFK-C
www.insigniaproducts.com
Using your flash kit
To use your flash kit:
1 Assemble your flash kit. See “Assembling your flash kit
” on page 5.
2 If you are not using a PC sync cable, position the flash heads so that the light sensor on your flash head has a
clear line-of-sight to the camera’s flash.
3 Point the flash head toward the surface you want the light to reflect off of. You can point the flash toward an
umbrella or a wall or other surface.
4 Plug the power cord on the light holder into a power outlet, then press the power switch on the on back of the
flash head. When the flash is fully charged, the READY indicator lights green.
5 If necessary, adjust the flash intensity. Turn the intensity knob clockwise to increase the flash intensity or
counter-clockwise to decrease the flash intensity.
6 Take a picture.
Note
If you decrease the flash intensity, press the TEST button
to release the stored power. When the flash recharges, the
amount of stored power matches to lower setting.
Tips
For best results:
• Take several shots.
• If the picture is too dark, increase the flash intensity.
• If the picture is too light, decrease the flash intensity or
adjust the camera’s exposure.
• If the picture has unwanted shadows, move the flash or
use an umbrella to filter the light from the flash.
NS-DACMSFK_NS-DACMSFK-C_16-0144_V2_MAN_ENG.book Page 8 Tuesday, March 1, 2016 10:14 AM
Loading ...
Loading ...
Loading ...