PH510PG User Manual

Loading ...

OPTION2Settings

1 Press the SETTINGS button.

2 Use the , , , or button to select OPTION2 and press the

OK button.

3 Use the , , , or button to set up the desired item and press

the OK button.

- To return to the previous menu, press the button.

4 Press the EXITbutton when completed.

The settings for option 2 are described as follows.

Menu Description

Keystone

To prevent the screen image from becoming trapezoidal,

Keystone adjusts the top and bottom width of the image if

the projector is not set at a right angle to the screen.

Auto

Keystone

AutoKeystone provides a rectangular screen image by

automatically adjusting the Keystone number when there

is a trapezoidal screen image caused by tilting of the

projector.

Item

On Automatically adjusts the Keystone number.

Off Manually adjusts the Keystone number.

PJTMode

This function turns the projected image upside down or

ips horizontal.

• Select Rear when projecting from the back of the

transparent screen purchased separately.

• Select FrontCeiling when installing the product on the

ceiling.

• When the PJTMode is RearCeiling/FrontCeiling,

the left/right of the speaker changes automatically.

High

Altitude

If the projector is used at an altitude higher than 1200

meters, turn this on.

Otherwise, the projector may overheat or its protection

function may be activated. If this happens, turn the

projector o󰀨 and then on again after waiting for several

minutes.

Loading ...

User Manual - Page 91