OceanAire PAC2412 Air Conditio

User Manual - Page 13

For PAC2412.

PDF File Manual, 32 pages, Read Online | Download pdf file

PAC2412 photo
Loading ...
Loading ...
Loading ...
ACCESSORIES
DISCHARGE AIR NOZZLE KIT ASSEMBLY
The optional discharge nozzle kits are used to direct the conditioned
air to a specific target area. By concentrating the airflow, the nozzles
increase the air velocity towards production lines to cool personnel
and/or equipment. In server rooms, the nozzles can be used to
direct the airflow through the rack to remove the hot air from the
area of the equipment.
2NK-1 for model PAC12, (2) 4-inch diameter nozzles with an
approximate compressed length of 15 inches. The approximate
extended length is 21 inches.
2NK-2 for models PAC18, PAC24 (2) 6-inch diameter nozzles
with an approximate compressed length of 22 inches. The
approximate extended length is 32 inches.
2NK-3 for models PAC36 and PAC60, (2) 8-inch diameter
nozzles with an approximate compressed length of 20 inches. The
extended length is approximately 29 inches.
The nozzle kits come pre-assembled with the nozzles secured to a
mounting plate and with edge guards. By removing the discharge
grille, you can insert the nozzle kit into the opening without the use
of tools.
Nozzle Kit
Kit Voltage
UPK-115 115V
UPK-230 208/230V
Replacement Pump Only
057-008R 115V
057-012R 230V
CONDENSATE PUMP KIT
A plug-in condensate pump kit is available for applications where emptying the 5 gallon
condensate tank is not practical. The pump kit consists of a condensate pump with
mounting hardware and electrical connections, along with the tubing required for the drain
and discharge of the condensate water.
PARTS LIST
Condensate Pump with Mounting
Hardware/Screws
Drain hose
Tubing
Wiring Harness
Low Voltage Jumper
Hose Clamps
Pump Kit
The condensate pump provides for the
automatic removal of condensate water during
the cooling process. The pump is capable of
pumping to a 20 foot height, allowing for the
routing of the drain line above the drop-ceiling
to a nearby drain. The pump is controlled by
an internal float-switch/check valve, which
turns the pump on and off automatically. The
pump is also equipped with a condensate over
-flow safety switch that will shut down the unit
compressor when the pump is not working
properly.
11
Loading ...
Loading ...
Loading ...