Loading ...
Loading ...
Loading ...
www.insigniaproducts.com
13
NS-HF2003
STEP 6 - Attach the back panel.
You’ll need
1 Align the screws on the back panel (3) with the screw holes on the back of your stand.
2 Align two mounting tabs (WC) with the holes on the top of each corner of the back panel as shown.
3 Insert two wood screws 3 × 16 × 8 mm (L) through the mounting tabs and into the back of your stand. Tighten the
screws.
4 Align two wire management strips (M) horizontally with the center holes on the back panel as shown.
5 Insert two wood screws 3 × 16 × 8 mm (L) through the wire management strips and into the back of your stand. Tighten
the screws.
6 Secure the back panel to your stand with 19 wood screws 3 × 16 × 8 mm (L).
3 Back panel (1)
L Wood screw 3 × 16 × 8 mm
(23)
M Wire management
strip (2)
WC Mounting tabs (2)
Note: WC is part of the
Anti-Tip Safety Kit
Phillips screwdriver
L
WC
WC
Loading ...
Loading ...
Loading ...