Loading ...
Loading ...
Loading ...
10 ENGLISH
To pick up water or wet dust only, the water lter is more
suitable than the cloth lter.
When installing the water lter, align its mounting posi-
tion mark with the one on the tank.
3
1
2
► 1. Water lter 2. Tank 3. Mounting position marking
NOTE: It is recommended using water lter when
picking up large amount of water repeatedly.
Otherwise vacuum ability may be reduced in case of
cloth lter.
Installing the paper pack
Optional accessory
WARNING: When using the paper pack, also
use the cloth lter or prelter together that is
preinstalled on the cleaner. Failure to use the cloth
lter / prelter together may cause unusual noise and
heat, resulting in a re.
CAUTION: (For the cloth lter model)
•
Never pick up water or other liquids or wet
dusts when using the paper pack. Picking up
such things may cause the paper pack breakage.
• Before using the paper pack, make sure that
powder lter (optional accessory), damper
(optional accessory) and prelter are always
used together.
CAUTION: (For the powder lter model)
• Before using the paper pack, make sure
that powder lter, damper and prelter are
always used together.
1. Remove the rubber holder.
1
► 1. Rubber holder
2. Extend the paper pack.
3. Align the paper pack opening with the dust suction
opening of the cleaner.
4. Insert the cardboard of the paper pack onto the
holder so that it is positioned at the end beyond the
detent protrusion.
1
2
► 1. Paper pack 2. Holder
Installing the polyethylene bag
Cleaner can also be used without polyethylene bag.
However, using polyethylene bag is easier to empty the
tank without letting your hands dirty.
Spread the polyethylene bag in the tank. Insert it
between the holder plate and the tank, and pull it to the
hose inlet.
2
1
► 1. Holder plate 2. Polyethylene bag
Loading ...
Loading ...
Loading ...