Loading ...
Loading ...
Loading ...
1312
Setting TIME and TEMP
Settings to Start
1. Place prepared foods on the
Drying Trays (see p. 17 for food
preparation tips). Do not overload
the Drying Trays with food.
2. Food should be placed on Drying
Trays in single layers ONLY, not
touching or overlapping in any
way.
3. Plug the polarized plug into
a compatible outlet. A BEEP
sound indicates the Cut + Dry
Dehydrator is receiving power.
4. Slide the EasyVue Door down until
it is securely closed.
5. Press the START button on the
Control Panel. The drying process
will begin right away. The
interior Heating Element
will begin automatically heating
within 5 seconds.
6. The LED Display on the Control
Panel will display the default
drying time of 10 hours (10:00).
7. Press the TEMP button on the
Control Panel. The LED Display
will show the default TEMP of
158°F. The LED Display will then
automatically return to display the
drying time remaining.
Changing TIME and TEMP
Settings while Drying
Occasionally, it may be appropriate
to speed the drying process or slow it
down, depending on how the drying
is proceeding. In order to do so, follow
the simple Step-by-Step instructions
that follow.
NOTE: The Time remaining in the
drying process is always shown on the
LED Display during the process.
The LED Control Panel holds all the electronic instructions for drying foods.
Follow the simple Step-by-Step instructions below to successfully start and
complete the drying process.
LED CONTROL PANEL
13
TIMER
button
TEMP
button
Start & Stop
buttons
DECREASE/—
button
TIME
TEMP
-
+
START
STOP
19:30
INCREASE/+
Icon
Loading ...
Loading ...
Loading ...