Loading ...
Loading ...
Loading ...
ENGLISH
|
11
PROPER STORAGE
Preparing your Everyday Steam Cleaner for storage is quick and simple. When you have nished
your steaming tasks, follow the steps listed below.
1. Unplug power cord from electrical outlet.
2. Allow unit to cool (30 minutes for complete cooling).
3. Press and hold Steam Trigger to release all remaining steam pressure.
4. Unscrew and remove Boiler Cap. Drain all remaining water from Boiler into a sink or tub, then
loosely replace Boiler Cap.
NOTE: Do not overtighten Boiler Cap when storing, as this may make it difcult to remove
during next use.
5. Loosely bundle power cord, and store Everyday Steam Cleaner in a cool dry location.
CARE & MAINTENANCE
A common maintenance need for steam appliances is the removal of build-up caused by high
mineral content in many municipal water supplies. This mineral build-up may limit the
effectiveness and reduce the life of your Everyday Steam Cleaner.
The best way to minimize mineral build-up is to use distilled or de-mineralized water when
using your Everyday Steam Cleaner. If you are unable to use distilled water, it is recommended that
the following procedure be followed monthly to help remove any mineral build-up:
To remove mineral build-up:
1. Unplug power cord from electrical outlet.
2. Allow unit to cool (30 minutes for complete cooling).
3. Press and hold Steam Trigger to release all remaining steam pressure.
4. Unscrew and remove Boiler Cap, and drain any remaining water from Boiler into a sink or tub.
5. Fill Measuring Cup with 6 oz (180 ml) distilled vinegar. Carefully pour vinegar into Boiler.
6. Slowly shake or move unit around to agitate vinegar.
7. Allow to stand for at least 40 minutes, or more if possible.
8. Drain vinegar from Boiler.
9. Rinse Boiler with fresh water, drain and repeat until vinegar odor dissipates.
10. Loosely replace Boiler Cap and continue with normal storage procedure, as outlined in
Proper Storage section above.
Storage & Care
Loading ...
Loading ...
Loading ...