Loading ...
Loading ...
Loading ...
24
EN
Manual Mode and Auto Mode
• Press the Auto/Manual mode button (19) to change the mode to Manual or Auto.
• In manual mode, the display in manual mode (7) shows an “M” while the “A” is
hidden.
• In auto mode, the display in auto mode (8) shows the “A” and the “M” is hidden.
Shutdown memory function
• Press the power switch (20) to turn the unit off and on again, or if it is in standby,
turn it on. The temperature is the last set.
• Both the Auto Mode Timer and the Manual Mode Timer have a shutdown memory
function.
Switching off the electrical memory function
• If the unit is unexpectedly turned off or there is a sudden power failure, only the
power indicator (1) lights up when the power is back on and the system is turned
off.
• Press the start/stop button (20) to turn the system back on. The system operates in
the last mode saved.
Delete
• Press the “OK” button (12) for 5 seconds until a “di” tone is heard, all previous
settings of the week timer or day timer have been deleted.
Open Window Detection
• If an open window is detected, the unit stops the heating.
Delete Open Window Detection
• Press the start/stop button (20) twice to switch off and on. The “WO” indicator light
is deactivated in the window open display (6). The heater is in normal operation.
Signal sound
• Each time you press the key, an acoustic signal sounds, a continuous pressure
sounds only once.
Child lock
• When the unit is in operation, press the up (10) and down (11) buttons
simultaneously for 3 seconds. The system is locked. The temperature display (15) rst
shows “[ ]“ and switches to room temperature after 5 seconds.
• If you make any entry, it will take 5 seconds “[ ]“ is displayed, the acoustic signal
sounds and then the room temperature is displayed again.
Loading ...
Loading ...
Loading ...