Loading ...
Loading ...
Loading ...
Always disconnect air supply: 1. Before making adjustments; 2.
When servicing the tool; 3. When clearing a jam; 4. When tool is
not in use; 5.
When moving to a different work area, as accidental
actuation may occur,
possibly causing injury.
The depth adjustment feature provides close control of the fastener drive depth; from flush with
the work surface to shallow or deep countersink. First, set the air pressure for consistent drive in
the specific work. Then use the depth adjustment to give the desired depth of drive.
1. Disconnect the tool from the air supply.
2. Use 3mm hex. wrench, loose bolts, and adjust front plate.
3. Tighten bolts and try to drive a test nail after each adjustment until the desired depth
is set.
Page 7
DEPTH ADJUSTMENT
Loading ...
Loading ...
Loading ...