Loading ...
Loading ...
Loading ...
11
Option B - UNDERMOUNT INSTALLATl ON
1. Trace Opening
a. Locate the undermount template in the box
b. Cut carefully along the dotted lines. Keep the inside portion
of the template. It contains important information concerning care and
maintenance for your new sink
c. Place the template on the counter, in the location where you will be
installing the sink. When placing the template, note the location
of cabinet doors and panels to ensure that they are compatible with
sink installation. Make sure that there is enough space for water supply
installation. Identify the location of the faucet and soap dispenser
d. Fix the template to the counter using masking tape
e. Trace the inside of the template with a pencil. Remove the template
from the countertop
2. Cut Opening
a. Using the drill, make a small starting hole of about l/2” on the inside of
the cutting line
b. Drill a second time in the same hole with a larger bit to enlarge the hole
so that the jigsaw can be inserted properly
c. Put masking tape on the outer side of the cutting line. This will protect
the counter from scratches and shattered fragments caused by the jigsaw
d. Using the jigsaw, trim the inside of the cutting line
Loading ...
Loading ...
Loading ...